Enterprise announcement：
Warmly welcome to our booth(#C1004) in 18TH CHINA XIAMEN INTERNATIONAL STONE FAIR from 6-9 March 2019!!!
In the decoration of the stone is a common material, it can be effective to extend the life of the maintenance, so maintenance has become part of the can not be ignored. According to the general stone maintenance process: as drying, polishing, grinding stones, fill leveling treatment, waterproof, rust yellow door, crystal processing. The following will introduce the specific operation process.
One. Ground into dry
The implementation of the steps also need to be divided into two kinds of situations, a situation, for the original stone surface joints of the water problem, through the far infrared lamp heating drying. In another case, for other flat moisture, can use natural drying method.
Two. Fill in the crevice
This method is the most important to solve the crevice seepage prevention measures, so we should attach great importance to the. Should choose good adhesion, no powder, waterproof, can grind and polishing materials.
Three. Leveling polishing
For the stone surface after doing waterproof treatment, caused by stone color, can not be directly ground leveling. You can use steel wool and combined with special equipment to clean the grinding, the color layer on the surface of the ground, which can reveal the original color of the stone surface.
Four. Rust yellow treatment
First of all need to use steel wool to rust where serious sanding to remove surface rust. After then, the marble rust remover devoted to rust.
Five. Waterproof, protection
This part of the operation is to avoid the recurrence of stone in the future water stains, rust, and other aspects of pollution. At this point need to do a good job of these processes:
1 clean the market health; 2 will be fully dry; 3 evenly protective agent and moistening the stone surface; 4 the use of natural ventilation drying time in more than 24 hours.
Six. Crystal processing
After completing the above process, you can start the crystal processing. According to the use of process description, hardening agent, light agent using the Spanish crystal, through pressure and low speed grinding equipment, make the product appear THERMIFICATION reaction agent to make the ground to form a hard, mirror with slip effect.
In order to keep the stone for a long time good decorative effect, the owners often stone maintenance. In accordance with the above operation, can protect the stone from the outside world erosion and pollution, the corresponding increase in service life. How to carry out maintenance can refer to the above recommendations.